Clipped Head Nail Making Machine

Clipped Head Nail Making Machine

Specification

The Advantage of Our Clipped Head Nail Making Machine

The nail speed of the D-type nail making mechanism can be increased by 2-3 times, and the pass rate has reached 99.99%. It will automatically stop when it encounters long and short nails, large and small heads, so as to prevent a lot of defective nails; The important thing is that because the quality of nail making is guaranteed, an operator can easily operate 3-5 sets, and the machine will automatically finish the process without the operator’s presense, which greatly reduces the workload of the inspector. The same model also has the functions of making nails with small head rolls and paper strip nails, which can be described as multi-purpose. Greatly save the loss of mold tools. Because the cutter adopts the principle of cutting without touching, a cutter can be used for about three months under normal circumstances.

Tips for Machine Tool Lifting

• Use a crane to lift a machine tool wrapped with a wrap film. During the lifting and unloading, the bottom or side of the machine must not be subjected to impact or severe vibration. Under no circumstances should the machine be tilted excessively.

• Check the external condition of the machine before installing the machine, and check whether the accessories and tools are complete according to the "packing list".

• When the machine tool is lifted, avoid collision, use the cable reasonably, and never attach the rope to the extended mechanical parts (especially the slider). Lift the machine tool to prevent the cable from directly contacting the painted surface and damage the machine tool. Cloth or wooden block lifting.

• The supplied rubber horn is for customers to adjust and install on uneven ground. Before use, adjust the horn to keep the whole machine level to start.

• Avoid direct sunlight on the machine or heat radiation machine to cause changes in ambient temperature.

• Install away from flammable and explosive materials.

• Avoid direct sunlight on the machine or heat radiation machine to cause changes in ambient temperature.

NOTE

• To keep the machine being balanced in the vertical and horizontal directions, the machine should be balanced when the machine has just been removed from the ground.

• Lifting wire rope angle must not exceed 60°.

• Whenever the machine is lifted, as long as it is not performed by one person, signals should be given to each other to work together.

Nails Produced by Clipped Head Nail Making Machine

The lastest type of high speed clipped head nail machine is the result of our arduous labor of many skilled engineers with rich experience and we always win trust and praise by the machine’s excellent performance.

Factory Images

Should there any other concerns or queries please do feel free to let us know, we can work on it together.
Thanks and with warm regards!

FINE FASTENERS INDUSTRY CO.,LTD

Jack Li

Mobile/Whatsapp/Viber/Skype: +86 19105658281

Tel: +86 55182620162

Email: export

http://www.ffifasteners.com/