Stainless Steel Lapping Machine

Equipment Use:

This plane lapper is suitable for mass production of small stainless steel workpieces and small batch production of large workpieces. Usually there are stainless steel logos, stainless steel buttons, stainless steel light guide plates, stainless steel molds and so on.

Working Principle:

1. This equipment is a precision lapping and polishing equipment. The material to be ground and polished is placed on the polishing disk. The polishing disk rotates counterclockwise. The correction wheel drives the workpiece to rotate. The pressurized cylinder presses the workpiece. The workpiece and the polishing disk perform relative running friction. To achieve the purpose of lapping and polishing.

2. The lapping disc dressing mechanism adopts hydraulic suspension rail to reciprocate back and forth, and the diamond dressing knife precisely dresses the lapping surface of the lapping disc to obtain an ideal plane effect.

Equipment Features:

1. The workpiece pressure of this stainless steel plane polishing machine adopts the method of cylinder pressure, and the pressure is adjustable;

2. The stainless steel plane polishing machine adopts PLC program control system, touch screen operation panel, lapping disc speed and timing can be directly input on the touch screen.

Equipment Specifications:

Stainless steel lapping and polishing machine processing flow

Research on the surface quality of stainless steel lapping and polishing machines and the main reason for improving the appearance of stainless steel workpieces. For this reason, many experts and scholars in the polishing industry are dedicated to research in this field, hoping to continuously improve the surface quality of stainless steel workpieces.

The process flow of stainless steel lapping and polishing machine is as follows:

The first step: blanking----lapping outer periphery----peripheral chamfer----bevel lapping

Step 2: Paste the stainless steel workpiece on the plate----grind the surface----manually clean the inclined surface

The third step, mirror lapping-manual cleaning-lapping plane-manual cleaning

Fourth step, stainless steel workpiece bottom plate-manual cleaning-polishing-cleaning-check the surface quality.

Various stainless steel workpieces in actual use are all cut or machined from stainless steel rods. Due to the changes in cutting conditions, there are deviations in the thickness and flatness of the cutting blades. If the cutting conditions are not suitable, it will cause a deeper damage layer. During the polishing process, the amount of surface removal is very small, so it is necessary to use lapping to effectively improve the deviation of the curvature, flatness and parallelism of the stainless steel workpiece, and reduce the thickness of the damage layer.

From the lapping and polishing process of the above stainless steel lapping and polishing machine, it can be seen that the lapping, polishing and cleaning of stainless steel are all implemented step by step through rigorous procedures. These are all due to the special material of stainless steel. Our company specializes in the production of machines for the two stages of flat lapping and mirror polishing. The stainless steel series machines developed by our company have been appreciated by the lapping and polishing industry.

http://www.szjiuyuda.com/